葡京合法直营赌场

Today is Monday, January 13, 2020, Welcome to this site

H

Dynamic information

Waterproof height required for bathroom

手机页面二维码 Text: [Large] [Medium] [Small] QR code of mobile phone page 浏览次数: 9/12/2019 Views:
When the house is being renovated, there are two major projects that the owner needs to know for himself: water and electricity renovation and home improvement waterproofing. Hydropower is something that is used every day in daily life, so owners need to know more or less. Today I will tell you how high the bathroom waterproof is. Let ’s learn together.

How high is the bathroom waterproof?

I. The national standard of the National Construction Commission for the waterproof height of the bathroom is 1.8 meters. The building has already been waterproofed when the house is under construction. But the wall is basically waterproof.

1. If the waterproofing is low, water will penetrate into the wall due to long-term spraying, which will easily cause mildew on the wall, fall off the decorative layer on the wall and lose the waterproof effect.

2. In principle, non-shower walls can be 1.5 meters, but in order to strengthen the waterproof effect, 1.8 meters can be unified, and the cost is not increased. For the light body wall and the self-built light body wall in the bathroom, it is recommended that the waterproof height be the top.

2. If the bathroom of the toilet is a shower, then the height of the waterproof layer on the wall of the shower head in the conventional bathroom must not be less than 1800MM, and the thickness of the waterproof layer must not be less than 1.5MM. After the waterproofing project is completed, a 24-hour water storage experiment must be performed. Just one meter on the wall. If the bathroom of the bathroom is a bathtub, then the waterproof surface of the wall adjacent to the bathtub is 30cm higher than the height of the bathtub.

Note: The waterproof layer on the ground, such as the waterproof pipe joints on the ground, the flatness of the ground waterproofing, the shower switch, the toilet, etc., must not affect the height of the tile.

Bathroom waterproof specifications

1. Waterproof construction should be used for coating film waterproof material.

2. The performance of the waterproof material should meet the requirements of the relevant national standards and a product certificate of conformity.

3. The waterproof cement mortar leveling layer is compactly combined with the foundation, without hollow drums, the surface is flat and smooth, and the yin and yang angles are made into arcs.

4, the coating film waterproof layer is evenly painted, the thickness meets the technical requirements of the product, and the general thickness is> 1.5mm without exposure.

5. When using construction stubble, overlap should be made in the direction of flowing water. The overlap width is> 100mm. When using more than two layers of glass fiber cloth, the width should be staggered by 1/2.

6. The surface of the grassroots should be flat and free from defects such as hollowing and cracking. The moisture content of the base layer shall meet the construction requirements of the waterproof material.

7. The waterproof layer should extend from the ground to the wall surface, 250mm higher than the ground; the waterproofness of the bathroom wall surface is> 1800mm.

8. The surface of the coating film is non-foaming, non-flowing, flat and uneven, and has tight joints with pipes, sanitary ware feet, floor drains, and drainage outlets, and does not leak.

9. The thickness and strength of the protective layer of cement mortar must meet the design requirements. During operation, it is strictly forbidden to damage the waterproof layer. According to the design requirements, the flooding slope of the ground shall be done.

The above is the introduction of the height of the bathroom waterproof, I hope to help everyone.
Go back
print this page
More
Decoration style
18726463398
Browse mobile stations
赌博网安全靠谱 正规网赌app盘口 真人买彩票澳门 现金滚球网站 真钱扑克平台盘口 澳门真人买彩票网站 现金滚球游戏平台 真钱滚球娱乐 葡京正规直营合法赌城 赌场永利盘口